当前位置: 首页 行业新闻 西门子智能电气阀门定位器的应用

行业新闻

原文:
Datong second power plant a total installed capacity of 1.2 million kilowatts project, with 6 sets of Dongfang Boiler Works, Dongfang Steam Turbine Works, Dongfang Electrical Machinery Plant produced 200MWCheck Valves generating units, boilers, high pressure single drum natural circulation for the first time Reheat solid slagging coal Powder furnace, using ball mill, intermediate storage bunker pulverizing system, boiler rated evaporation 670t / h, main steam pressure 13.7MPa, the main steam temperature of 540 ℃. High pressure boiler, in which # 1, # 2 furnace was DG670/140-540/540-5 type furnace, # 3 ~ # 6 furnace was DG670/140-540/540-8 type furnace. Single high pressure turbine for the first three rows of triplex intermediate steam reheat condensing steam turbine, generators, waterButterfly Valves cooling for the stator winding, stator and rotor of cold hydrogen. 5,6 unit installed which was first introduced in China in Hungary Heller indirect dry cooling system condenser heat exchanger mixing. Each unit of the ball mill, pulverizing system of Bin sub # 1, # 2, two systems, each system Zhejiang Ruian installed 5 sets of three production plants ZSLD instrument type pneumatic actuator, since the production has been has not been put into automatic control system, combustion system to send another, cited inSafety valves the wind baffle is also used 4 sets of ZSLD type pneumatic actuator (part has been used 6DR3101- / 2N and 6DR3104-8N locator devices for the transformation of valve position), has also used a minimum of 15 years, on the other hand as the three plants in Ruian, Zhejiang replacement of the old instrument spare parts have been phased out does not produce the aerodynamic body and of new production not compatible with the old institutions and upgrades, we will use this opportunity to overhaul of Unit 6 of the milling system, a Reducing Valves complete overhaul of pneumatic actuators. 2, Ryan Air Doors reform process The transformation of Beijing used a box produced by pneumatic actuator, the company for the actual operation of domestic power plants, and adopt Beijing Siemens company co-production methods, to provide designs and drawings under the company selected imported parts production of a new generation of executive body. With high control precision, earthquake, dust, maintenance-free operation, etc., are suitable for control API Cast Steel Valves of power plant operating environment such as poor baffle damper device. After many other power users to run practice, to prove that the product has reached and exceeded the performance of the implementing agencies of similar import. 3, reformed institutions for use: 3.1, filter regulator: to adjust the input supply pressure to 0.55Mpa about general cleaning with alcohol once every six months.
原文来自:http://www.nytimes.com/1990/07/24/nyregion/engineers-battle-to-restart-pump-to-halt-sewage-flow.html

Engineers Battle to Restart Pump to Halt Sewage Flow;是由 上海一环流体控制设备有限公司提供的阀门新闻,中文译文仅供参考,以下提供站内导航搜索:

中国截止阀网 截止阀产品 截止阀知识 截止阀厂商 截止阀论坛 截止阀行业新闻


以下是参考译文:

译文:西门子智能电气阀门定位器的应用
大同第二发电厂一期工程总装机容量120万千瓦,装有6台东方锅炉厂、东方汽轮机厂、   东方电机厂生产的200MW发电机组,锅炉为闸阀 超高压单汽包自然循环一次中间再热固态排渣煤   粉炉,采用钢球磨煤机、中间储仓式制粉系统,锅炉为额定蒸发量670t/h,主蒸汽压力   13.7MPa,主蒸汽温度540℃。超高压锅炉,其中#1、#2炉为DG670/140-540/540-5型炉,   #3~#6炉为DG670/140-540/540-8型炉。汽轮机为单轴超高压一次中间截止阀 再热三缸三排汽凝汽式汽轮机,发电机为定子绕组水内冷,定子铁芯及转子氢冷。其中5、6号机组安装有我国首次引进的匈牙利海勒式凝汽器混合换热间接空冷系统。   每台机组的钢球磨煤机、中间储仓式制粉系统分#1、#2两套系统,每套系统中安装了5台浙江瑞安仪表三厂生产的ZSLD型气动执行机构,自投产以来一直未投入自动调节系统,另外燃烧系统的送、引风挡板也使用了4台ZSLD型气动止回阀 执行机构(部分已使用6DR3101-   /2N定位器及6DR3104-8N阀位装置进行了改造),至今最少的也使用了15年,另一方面由于浙江瑞安仪表三厂更新换代旧的备件已淘汰不生产,新生产的气动机构与旧机构又不兼容和升级,我们就利用今年#6机组大修的机会对制粉系统的气动执行机构进行彻底改造。   2、瑞安气动门改造过程   此次改造采用的是北京一公司生产的箱式气动执行机构,其公司针对国内电厂蝶阀 实际运行情况,采取与北京西门子公司合作的生产方式,根据提供设计方案及图纸,公司精选国外进口配件生产的新一代执行机构。具有控制精度高、抗震、防尘、免维护运行等特点,非常适合于控制电厂风门挡板等运行环境较差的设备。经过柱塞阀 其它众多电力用户的运行实践,证明该产品已达到并超过了安全阀 同类进口执行机构的性能。   3、改造后机构的使用说明:   3.1、过滤减压阀:调整输入气源压力至0.55Mpa左右,一般每六个月用酒精清洗一次。

更多新闻

  • "8万亿不算富"更应拧紧"开支"阀门
  • 市水暖阀门企业产能、产品质量双双提升的需求
  • 更换装歪了的坏水阀
  • 漏水是因楼上住户家的自动上水型太阳能管道阀爆裂